T2 PC™

T2. Multispectral perfection, only further! While simultaneously maintaining the absolute colour finesse of Robe’s phenomenally successful T1 series, featuring the MSL™ (Multi-Spectral) LED engine, our T2 PC™ provides an enhanced output of over 17.000 lumens, measured at the front lens, via its 850W MSL™ source.

With their zoom range of 6-62°, and soft beam, T2 PCs are ideally suited to their long-throw role in theatre, television, and touring.

T2 PCs are full of theatrical subtlety. With CMY colour control, DataSwatch™ filters containing a selection of pre-programmed colours via our renowned RCC™ (Robe Colour Calibration) algorithm and a wide-ranging 2.700K to 8.000K CCT control, all variations of colour are possible. With absolutely no variation in colour produced by T1 and T2 platforms, you can use them together with confidence to provide consistent colour across your lighting rig, perfect for even the most demanding designers.

The precise needs of theatrical dimming are catered to with our super-smooth L3™ dimming system producing imperceptible fades to black. The exceptionally high CRI of 95+ assures natural rendition of all skin tones.

Specifically, for television work, we have included a plus and minus green channel and the Cpulse™ flicker-free management system for all vision systems including HD and UHD cameras, all controllable directly from your console.

Designed to operate in noise-sensitive environments such as television studios, theatres, and houses of worship, the T2 PC™ utilises our innovative AirLOC™ system. Meaning "Less Optical Cleaning," this technology not only aids noise reduction but also dramatically reduces the level of airborne particles drawn over the optics, keeping them in pristine condition for far longer.

All this combined with our highly acclaimed internal four individually controlled leaf barndoor system, rotational scrim control, two interchangeable frosts and ground-breaking edge control technology, gives you total control over your designs in theatre, television, and touring.

Light source

MSL™ 850 W Multi-Spectral LED engine

Light output

up to 17.000 lm, CRI 95+, + - Green Correction Function, Cpulse™ special flicker free management for HD and UHD cameras

Zoom range

6° - 62°

Effects

Beam Shaper (internal barndoors), Scrim Module

Innovations

Cpulse™ - Pulse Width Modulation Control

Cpulse™ is a PWM (Pulse Width Modulation) control system for luminaires that allows you to select and fine-tune the LED driving frequency to ensure no flicker will be visible on any camera system.

MSL™ - Multi Spectral Light Source

Robe's MSL™ (Multi-Spectral Light) LED light engines are, specifically, designed to consistently deliver the highest quality light through the additive colour mixing method. The MSL spreads the emitted light equally throughout the Planck curve, thereby providing the widest possible colour gamut, while simultaneously delivering seamless full range CCT control.

RotaScrim™- Graduated Scrim Control

Found in our wash lights, our RotaScrim™ control feature gives you the ability to remove those distracting “hot spots” from the beam where the distance of the illuminated surface is closer to the fixture. By applying the graduated scrim filter, this can easily be removed and changed into an even flat field.

4Door™ - Internal Barndoors

Robe barndoors operate the same way as a conventional 4 leaf barndoor. The quick, accurate internal 4Door™ barndoor system provides individual position control of the 4 “leafs” and +/- 90° rotation of the complete module assembly.

Edge Colour Correction

The edge colour correction sets Robe wash moving heads aside from other fixtures by providing the ability to shift the edge of the beam to either the red or blue end. This feature allows more or less definition of the internal barn doors cut, as you alter the beam.

EMS™ - Electronic Motion Stabiliser

The Robe Electronic Motion Stabiliser is a technology for exact Pan and Tilt movements and reduces vibrations from audio outputs, truss movement and sprung or suspended floors.

L3™ - Low Light Linearity System

The L3™ Low Light Linearity System produces imperceptible, ultra-smooth fades to black.

REAP™ - Robe Ethernet Access Portal

The Robe Ethernet Access Portal allows to access internal data from a networked fixture, viewed as a web page, addressable via the fixtures network IP.

DataSwatch™ - inbuilt virtual colour library

The DataSwatch™ inbuilt virtual colour library for Robe LED fixtures consists of up to 237 pre-programmed and calibrated colours and tones, allowing for rapid and accurate programming.

GDTF – General Device Type Format

The General Device Type Format creates a unified definition for exchange of data for the operation of intelligent luminaries, such as moving lights. The file format is human readable and developed using open source formats.

Tungsten Emulation

When selected, the luminaire will mimic the colour temperature of a tungsten lamp as you lower the output to produce that classic warm glow.

QVGA Robe Touch Screen Display System

The QVGA Robe touch screen display gives full access to all fixture setup and diagnostic functions and is very intuitive to navigate.

+ - Green Correction

Robe has included a dedicated +/- green control channel in fixtures that feature our MSL™ specific white TE™ source fixtures. This allows you to make the smallest changes of green content compared to the fixed levels produced by the specific filters on white source fixtures.

airLOC™

Our AirLOC™ (Less Optical Cleaning) technology greatly reduces the level of airborne particles drawn over the optical elements.

Epass™

Robe lighting’s Epass™ provides Ethernet in/out connections with a pass-through switch that sustains Ethernet integrity when the fixture has no power to automatically maintain network connectivity.

MAPS™ - Motionless Absolute Positioning System

Pre-use pan and tilt calibration movement of a fixture can be distracting and sometimes difficult to achieve.

Product Video

Technical Specification

Expand AllDownload PDFCollapse All

Source

Light source type: MSL™ 850 W Multi-Spectral LED engine (Patented)

Colour rendition:

CRI: 95, CRI R9: 91, TM30-18 Rf: 93, TM30-18 Rg: 103, TLCI: 94

LED life expectancy: min. 40.000 hours

Typical lumen maintenance: L70/B50 @ 40.000 hours

Light source warranty: 3 years or 20.000 hours

Optical system

Dynamic Effects and Features

Factory calibrated whites and colours via the new RCC™ (Robe Colour Calibration) system, automatic or on-call self-re-calibration of the LED engine without the use of any external tool (Patent pending)

Colour mixing: CMY/RGB or RGBAL

White light: Variable CCT 2.700K - 8.000K

DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K

Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4200K (red shift and thermal delay)

+ - Green correction function

Adjustable CRI from 80 to 95+

4Door™ - Internal Barndoors with individual control of the four leaves for added beam control of wash light, with +/- 90° module rotation (Patented)

RotaScrim™ - Internal Scrim module with graduated filter position control for asymmetrical style lighting of drapes and unwanted hotspot removal from scenery. The entire module can be rotated +/- 180° (Patented)

Frosts: MagFrost™ - magnetic paddle fast change system providing exchangeable frosts containing as standard a light 5° for instant softening of the projected gobo or framing shutters, and a medium 10° for even wash, both specifically selected for theatre and TV use

Motorized zoom

Edge colour correction

Electronic strobe effect with variable speed up to 20 Hz

Pre-programmed random strobe & pulse effects

L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black

Extremely quiet operation suitable for all types of production in Theatre and TV

Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K

AirLOC™ (Less Optical Cleaning) technology greatly reduces the level of airborne particles drawn over the optical elements. This increases the overall performance, light quality and time between routine cleaning and maintenance.

Control and programming

Setting & Addressing: ROBE Navigation System 2 (RNS2)

Display: QVGA Robe screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, built-in analyser for easy fault finding, NFC app controller

Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN

REAP™ - Robe Ethernet Access Portal

Wireless CRMX™ technology from Lumen Radio - on request

Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity

DMX Protocol modes: 3

Control channels: 35, 24, 39

Pan & Tilt resolution: 16 bit

Colour mixing: 8 or 16 bit (internal 18 bit)

Variable CCT: 8 bit

Internal barndoor module movement & rotation: 8 bit

Internal scrim module movement & rotation: 8 bit

Frost: 8 bit

Zoom: 8 or 16 bit

Edge colour correction: 8 bit

Dimmer: 8 or 16 bit (internal 18 bit)

Movement

Internal barndoors

Internal Scrim

Thermal specification

Noise Levels

Electrical specification and connections

Approvals

Mechanical specification

Rigging

Included items

Optional accessories

Legal

Related News

6 / 23 / 2023

Robe at ABTT 2023

The Robe UK team report a busy, successful, and very positive ABTT (Association of British Theatre Technicians) expo staged at Alexandra Palace in London, UK.

6 / 1 / 2023

Robe at SHOWTECH 2023 Expo

Robe will be exhibiting at the two and a half-day 2023 SHOWTECH entertainment expo next week, staged in Halls 1 and 3 at STATION in Berlin, one of the country’s most charismatic and unique event spaces right at the heart of the German capital adjacent to the world-famous Potsdamer Platz.

5 / 3 / 2022

Back at Prolight with Impressive Live Show and Lots More …

Czech Republic-based moving and LED lighting manufacturer Robe lighting s.r.o. rocked back to major live exhibition shows with a dazzling new live production, CUETE & The Beast, created exclusively for the Prolight+Sound 2022 expo and presented last week in Frankfurt, Germany.

12 / 17 / 2021

Enhanced preset editing in RoboSpot and other software updates

Here is one last Technical Newsletter for 2021 with the list of notable software changes. One of the most important updates is a new extended editing capability of Position presets in RoboSpot. Read on for more details.

Partner's websites:

We are proud sponsors of:

We are member of:

T2 PC™

T2 PC™

Product Video

Technical Specification

Related News

Navigate

Log in

Follow Us

Stay in Touch

Navigate

Log in

Follow Us

Stay in Touch